Quick OverviewEpoxybond Pool Putty is a unique two-part, hand-moldable epoxy putty specially formulated for concrete or gunite pool repairs. The convenient cartridge form provides a simple, equal mixing ratio (1 to 1). Just cut, mix and fix. There is no need to drain the pool to repair leaks and cracks because Epoxybond Pool Putty hardens under water. Once cured, it will not shrink or sag.Mixing and ApplicationUnderwater Repairs1. Area to be repaired must be free of loose particles,slime and algae.2. Mix equal amounts of Resin and Hardener thoroughly, above water, until putty is uniform in color.3. For best adhesion, press putty firmly into area requiring repair.Abovewater Repairs1. Area to be repaired must be thoroughly cleaned. Remove grease, loose particles and rust. For bestadhesion, roughen surface with wire brush orsandpaper.2. Mix equal amounts of Resin and Hardenerthoroughly until putty is uniform in color.3. For above water repairs, the putty can be contouredor smoothed by carefully rubbing with a wet sponge.Note: It is important to apply Epoxybond Pool Putty at least 1/16” thick. After application, Epoxybond Pool Putty should not be disturbed until completely cured.
Atlas Epoxy Pool Putty Set White B008PER1X2 Z8Hyoh9q